Steel Roofing Installation

Absolute Metal Roofing is your professional metal steel roofing contractor in London and Southwestern Ontario. Our metal steel roofing installation technicians are factory trained professionals, and specialize in only installing our EDCO steel roofing products.

Your metal steel roofing installation is paramount when it comes to the long term performance of your new roof. EDCO metal steel roofing is anchored directly to your roof with no strapping. This allows you to have a roof that can be walked on, whereas with a strapped roof you need to step exactly where the roof is strapped underneath or face denting and damaging the roof. Unless you have several layers of existing asphalt shingles, a cedar or wood roof, or issues with the plywood decking we install your new metal steel roofing directly over your existing roof.

The entire existing roof is covered with a protective membrane, it is even wrapped up under the chimney flashing and over the edge of your roof to cover and protect the entire area. All roof perforations such as vents, plumbing stacks, chimneys, and even skylights are flashed and sealed to last with your new lifetime metal steel roof.

The metal steel roofing panels are installed using hurricane clips, these clips are anchored directly to the roof and allow the metal steel roofing panels to expand and contract with temperature changes and from the heat of the sun. Screws or nails typically used in other metal roofing products perforate the roofing materials and do not allow for expansion and contraction of the roof, and this can cause roof distortion, screws to become loose, and can even create water issues. The EDCO metal steel roofing installation keeps the screw anchors hidden under the panels, creating a more visually pleasing finished product.

The metal steel roofing panels are installed using hurricane clips, these clips are anchored directly to the roof and allow the metal steel roofing panels to expand and contract with temperature changes and from the heat of the sun. Screws or nails typically used in other metal roofing products perforate the roofing materials and do not allow for expansion and contraction of the roof, and this can cause roof distortion, screws to become loose, and can even create water issues. The EDCO metal steel roofing installation keeps the screw anchors hidden under the panels, creating a more visually pleasing finished product. Learn more about our roofing, and why Absolute Metal Roofing will help you get the roof you’ve envisioned.

Metal Steel Roofing Installation Steps

Step 1

Cover The Entire Roof With A Protective Membrane

Step 2

Install A Drip Edge & Starter Accessory To Roof Perimeter

Step 3

Flash and Seal Chimney, Install New Vents & Other Roof Accessories Such As Skylites & Plumbing Stacks Seals

Step 4

Utilizing Hurricane Clips & Screw Anchors All Four Sides Of Each Panel Are Secured To Withstand Winds Up To 160 MPH

NO STRAPPING

EDCO metal steel roofing is installed directly to your roofing deck with NO STRAPPING! Strapping can collect moisture, create a gap between the deck and the metal roof to house birds and rodents, and raise the roof creating issues with drainage into the eavestrough.

SEE VIDEO

Watch EDCO Steel Roofing Installation Videos